Double Glazing Seal Repairs
If the seals of double glazing windows have been damaged they could cause damp and mould. This can cause damage to the frame as well as the walls surrounding it, and also impacting your health.
Resealing is a more cost-effective way to repair the majority of uPVC window frames than to replace them. A glazier will usually clean the frame of the window and the glass and apply a fresh layer of sealant, and smooth it.
Water Leaks
Window seals are made to keep water from your home. But, when they begin to break down, it could cause water leaks around your windows. Not only is a leaking window irritating, but it can cause costly damage to the structure of your home. It's important to identify the problem early and get it fixed by a professional before it gets any worse.
The cause of windows that leak is usually not in the glass, but rather on the frame or sill. A leak in this region is the most common indication of a failing window seal. double glazing repairs may be caused by damage to the window seal from weather or aging, worn out caulking or even an obstruction to drainage that results in the accumulation of ice or water.
Another sign of a window seal failing is the appearance of water between the panes of your double-glazed windows. This isn't as hazardous as a leak from water, since the water doesn't travel far enough to get into your home. However, it could mean that the inert gas sandwiched between the panes has been released, which can reduce the insulation value of your windows.
Condensation between the panes of glass is another typical sign of a failed seal. This could be caused by a failed seal or a damp atmosphere in your home. It could also be due to a problem with the glass. It is not only annoying however, the condensation could cause mold and mildew growth within your home. This can be a challenge and expensive.
If you're seeing these indicators, it's the time to have an inspection of your double glazed windows. Replacing or repairing your windows will protect your home against water leaks, reduce the cost of energy and remove drafts. It's a small price to pay for the security and comfort of your family. Contact Thompson Creek Window today to discuss your options regarding a window seal repair or replacement. Our skilled professionals are here to assist you! We offer assistance to homeowners in the Mid-Atlantic region.
Condensation
A damaged double-glazing seal could allow water to enter the insulating space. This water can cause condensation in the window panes. It could cause misting or fogging.
If you notice condensation inside your home It's time to call a double glazing repair service. Condensation is an indication that the vacuum seal fabricated in the factory has failed and moisture is seeping into the gap between the insulated and non-insulated.
Condensation is caused by a range of causes and is usually caused by gaskets, sealants or insulation in the uPVC frames of the windows. There are many options for repairing double glazing seals however it is essential that the new seals are properly measured to ensure an ideal seal and a perfect fit.
Typically, the gaskets that are used to seal the gaps between your double-glazed units are made from polyurethane foam. These are designed to last for a long time however, they may degrade over time due to natural wear and tear as well as exposure to various temperatures and weather conditions throughout the year.
As time passes the foam will shrink or crack. This can cause cracks in the seal and allow moisture to enter the double-glazed window. This can cause condensation but it can also result in a loss of energy efficiency, meaning that you're losing heat from your home to the outside air.
Re-sealing windows is one solution to this issue. However, this isn't guaranteed to fix the issue since it will only get rid of the condensation that has formed. It will not address the root issues that are causing your double-glazed windows ' to leak or to form condensation.
A professional who is able to provide an insurance-backed guarantee should replace your windows in full. This means that if the company fails or goes bust you'll still be covered by the insurance. It is important to remember that your replacement windows must be covered by a warranty of at minimum 10 years.
Misting
Verify that your double-glazing seals are in good condition as the fall season approaches. Seals that have worn-out can impact the properties of your windows' insulation as well as cause condensation, mold and dampness. It is essential to address any issues in your double-glazed windows as soon as possible to prevent further damage and save money on energy bills.
Double-glazed windows are constructed of two panes glass that are joined by a gas-filled inner space. The sealant layer on the outside fills the gap between uPVC frames and the glass. This is vital to ensure the airtight seal that keeps warm and cold air from your home, saving you money on your heating bills. However, over time, these seals will break down due to ageing or weather conditions, or even inadequate installation. The magic insulation formula which makes double-glazed windows so effective can begin to degrade as soon as this occurs.
If seals that are damaged or broken aren't repaired, they can lead to dampness and condensation that can affect your health as as the appearance of your window. The presence of mould and damp can cause damage to your walls, floors and ceilings, but they also cause allergens and irritants within your home that could be harmful to you and your family's health.
The most common problem with double glazing is the misting between the panes. This happens when moisture gets into that insulated section of your window. It is difficult to fix without professional help for repair of the seal on your double glazing.
There are DIY methods of tackling this problem, however, we would advise against this as it's not only risky but can be extremely dirty and damage your windows. These methods involve drilling holes in your glazed units and using chemicals to eliminate the condensation and fog. This can lead to various problems, most notably exposing your windows to water damage, which could cause the entire unit to be destroyed.
Professional glaziers have the equipment, skills and experience necessary to safely reseal uPVC frames. They also can give you lasting results. They can also offer tips on how to keep your uPVC window in good condition to avoid future problems.
Draughts
A draught from your window is an indication that the sealant has been damaged and must be replaced or repaired. This will block cold air from getting into your home. It will also increase the efficiency of your energy, reduce heating bills, and increase the comfort.
It is important to remember that some draughts aren't caused by window seals but rather the gap between the bricks' frame. In certain cases, it could be possible to correct this by simply caulking the gap. If this doesn't work, it will need to have the seal professionally resealed.
When the sealant around windows with double glazing begins to break down and allow water infiltration and can lead to dampness or even mold in a few instances. This could have a negative effect on health, and cause damage to the property. If you find any issues with water intrusion, you should address them promptly. If your windows are covered by a warranty It is worth checking to see if the company that supplied them will be able to cover the cost.
The windows themselves are typically covered by a warranty that could last for a minimum of 10 years, but some businesses offer lifetime warranties - so it is worth looking into this information. If your double-glazed windows are under warranty, it's worth calling the company you bought them from as soon as possible and giving them the details of any issues that you're experiencing. The ideal approach is to do this in person, or via letters and emails, to ensure all information is documented and clear.
It is also worth noting that draughts can be typically caused by defective hinges and not by a lack effective seals. The hinges cover the window sash which is the one you open. If they are not oiling them regularly they could become stiff. This can create a gap between the sash and the frame and allow cold air in. This problem can be solved by replacing the hinges, without affecting window seals.